Professional Custom Paper Packaging Factory Since 2003


custom logo printed boxes How to Make a Custom Logo to Brand Wood

by:Mengsheng     2020-04-17
custom logo printed boxes How to Make a Custom Logo to Brand Wood
There are several purposes to brand wooden products with signs.The image sets the overall design apart, creates an atmosphere of authenticity and promotes your brand to anyone who likes the product..Given that the image is usually created by applying hot metal or chemicals to burn the image to the top of the wood, it is difficult to transfer the details.
This is a big reason why many signs on wood are just letters or drawings with simple lines: burnt images require strong dark lines and no shadows.Once you understand the principle, it will be fun to be a great brand.One of the best ways to envision custom logos for brand wood is to look at what has been done before.
You can look for a company-like logo online or in books.Some signs, such as McDonald's "Golden Arch", last for decades for a reason.It can be copied in almost any size.Your logo may need to be similar to other companies in your field, so potential customers can identify images through products.
However, this image should also be unique enough to be different ---If this sounds difficult, there is always an option to work with a graphic designer.Please consider any restrictions if you are building a metal brand.A designer who only uses a few pieces of sheet metal may want to create his or her brand and make it have a lot of straight lines.
If you have a lathe, then be realistic about your tool talent.Those willing to use 3-Printing companies that make metal brands will find this possibility, but the image should still be simplified.There are several different ways to create custom wood logo brands.
Most brands require the metal to be heated and applied to wood, one using chemical combustion.Draw the logo you want to do on a piece of paper.Measure the size of the part you need.Use a metal cutter to cut the sheet metal into parts that match the logo block.
Bend the metal part using pliers to match the design.Weld the parts together, if necessary, to form a letter or graphic element.After creating the logo, weld it to the back plate and 2-Foot metal rod 1/3-Inches in diameter.
When welding, wear safety goggles and other appropriate safety devices if necessary.Purchase a metal plate large enough to save your logo, thick enough so that the design can be carved out without grinding.1/4-for most simple designs-inch-Just thick steel plate.
After drawing the mirror image of the design, transfer it to the board with a graphite pencil so that it can be seen but easily erased.Use a rotary tool with tungstenCarbide drill bit, ground around the image so that the remaining raised area will be a clean image of the logo.After completion, weld a metal rod handle on the back.
When cutting the metal plate with a rotating tool, be sure to wear safety goggles and gloves.into the wood.Transfer the image of the logo to 6-inch-Square foam rubber with magic marks.Use a tool knife to carve around the image so the logo is higher than the surrounding foam.
Be sure to wear safety goggles and gloves in the next steps.Dilute 1 tablespoon of ammonium chloride to 100 of water.Spray the chemical compound on the foam sign, then apply it to the wood and fix it in place with bricks until the sign burns onto the wood.
You can seem to be 3 these days-.
Unless you have a metal printer, you may need to send your design to a company for printing.Scan in the drawing or design the logo on the computer, then import the image into 3-D. drawing program.Design the brand to 3-Remember the guidelines for the printer, the size object.
Don't forget to include metal plates and handles on the back.When you receive the brand in the mail, you are ready
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...