Professional Custom Paper Packaging Factory Since 2003


phone box for sale How to Make Wire Baskets

by:Mengsheng     2020-04-03
phone box for sale How to Make Wire Baskets
Control your mess by making customizable line baskets from shredded chicken and aluminum tubes.Industrial tone on metal, handmadeThe carefully crafted baskets give them extra appeal, and with some simple adjustments they can easily be adapted to any measurement or shape.Measure and draw marks on 5/16-by-36-Aluminum tubes per 9 inch pound inch, black, thin-Tip permanent mark.
Using the adjustable cutter, cut the aluminum tube into four pieces using the marking drawn in front.These will be used later as side support for the box.Connect the smaller aluminum tube to a square with a wire.
Cut a Section 20-About 70 inch long gauge wire.Please note that during construction this wire will not be cut or trimmed, but will remain intact as a length wire that passes through the aluminum tube in a continuous manner.This approach will help to keep the pipe tightly connected, as there is no chance of wire separation in the connection.
To create the box form, slide the first of the eight 3/16 aluminum tubes into the wire.Pull the wire all the way through the tube, pull it out from the other end, and string it on the second tube.Repeat until all four tubes are attached to the wires.
Then pull the four tubes so that there will be more wires coming out at the end of the first and last tubes.Next, slide one end of the wire into the other end of the first tube.Push the wire through until it comes out from the other end.
Tighten it to form a square.
You should now have a thin aluminum tube with wires on both ends.Use more wires to connect the larger aluminum tubes to the corners of the square.Slide a thicker aluminum tube (from the part you cut before) into each outstanding wire.
Do not cut or trim the wire as it is needed for the next step.Use the rest of the wire and the rest of the tube, continue to thread the tube to the wire and bend the part to 3-D box form.After each step, tighten the wires and pipes to ensure sufficient tension.
When you create the box, you will want to connect the pipe to the wire one by one.When building 3-, pass the wire through the nearest pipe to secure each pipeD shape.If you need to connect the area between each other, simply pass the wire through the pipe until it reaches out at the correct connection.
There is not necessarily a pattern to do this --Just follow create 3-Box D and string the wires through the pipe to create the form.When you have finished creating the shape of the box, twist the last wire and gather around the three tubes so that it is tightly wound together and not loose --About four to five turns.Then cut off the extra line with the wire cutting machine.
Repeat at the other end of the wire and trim the excess.Use the needle if neededAt the nearest aluminum tube opening, any small part of the wire used to hide is exposed.Using heavy-Heavy duty wire clamp, cut the sides of each box of the width and height of four pieces of chicken wire, 2 inch month increase in length and width must-Overlapping inches on both sides attach them to the box.
Use a uniform grid of chicken lines to help keep the lines as straight as possible.Set each cut wire to the side.Wear safety work gloves for this step as the wires can be very sharp.Open the side of the box so that the edge you intend to handle will be up.
Put on your work gloves and flatten the cut shredded chicken between your flat palms.Put the first cut wire on the box.Gently fold the edge of the wire on all four aluminum tubes and attach it to the frame of the box.Repeat the steps on four sides of the box.
Measure and cut the fifth chicken line to match the lower side size of the box plus 2 inch on both sides to accommodate the necessary overlap.Press the cut chicken line again with your work gloves and bend with the same wire-and-The overlap method connects the workpiece to the lower side of the box.Use needle-Nose pliers can bend and/or trim excess wires and eliminate all sharp protruding edges.
Again, since it is not possible to eliminate all sharp edges, it is better not to expose the child to this craft.Cut a piece of card paper or thick cowhide into squares or rectangles.Write a labeled word on the cutting card to indicate what you plan to store and use a wooden decorative garment to connect it to the chicken line on one side of the box.
Once done, fill the box with whatever you plan to store.If you intend to keep the box in place without having to mention it to access its contents (think: in a simple-to-You can then put heavy items in the box.If you need to be able to drop the box down to access its contents, fill it with a lighter object so that you don't damage the softness of the aluminum chicken wire used on this box.
In order to increase durability, consider using steel chicken lines, but be aware that you may need to use a stronger line operation tool to bend it to a position in the form of a tube box during the production process.Please note that since it is not possible to remove all sharp edges from the wire material used in this project, it is better not to expose the child to this craft
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...