Professional Custom Paper Packaging Factory Since 2003

English

shoe box shoe storage Easy DIY Dowel Shoe Rack

by:Mengsheng     2020-04-04
shoe box shoe storage Easy DIY Dowel Shoe Rack
As our shoe collection grows, the space we need to store them is also growing!The style organization system, finding a location for each pair can be a daunting task-especially if you don't mess with a few locations!So why is our shoe storage system not creative?In this way, we can celebrate (and be able to find) them at any time, not hide them.This shoe rack can be used to accommodate any space in your home, it will look great on display, and your favorite shoes are lined up!Measure the space of the shoe rack.Narrow it to the nearest inch measurement range and cut a 1 "x1" round pin according to the size.
Draw a straight line along the length of the pin.Keep the line in the center by looking straight at the length of the pin to make sure it is straight.It should start and end in the same place.
Start 1 "from the pin edge, measure and Mark every 2 inch M along this line.In either direction, draw the second line from the first line.Start at the same end of the pin and measure 3 inch from the edge.
Starting from this point, Mark parking every 2 inch M 1 inch m from the other end.This should give you the points marked with a zigzag pattern.Drill a hole in each of these points.Measure "" along the drill bit and mark it with masking tape.
Use this as a guide to know how far to drill each time.Make sure to drill down directly into the center of the pin at the same angle each time.You can use the drill angle guide and the pair to get the perfect result.
Make a mark at the center of these two lines at both ends of the pin.Then draw a line along the diameter (to do this by measuring the longest point) to the other side.Turn the pin so that your existing hole is down and measure and mark the length of the "far off line and 2" pin.
These will be holes in your feet.
Repeat at both ends.
Repeat step 6 at these four points.
Cut four pins, 3 "long.
Polish the end and fix the pieces in four holes at the bottom of the pin with a little wood adhesive.You may need to push them in place with a hammer.Cut the pin to 10 "long.You need to calculate how many pins you need based on how many holes you have.
If required, place the beads on the top of each pin using wood glue to secure them in place.Squeeze a drop of wood glue into each hole at the top of the pin (one side with more holes) and push the end of the small pin into each hole.You may need to polish them a little or push them safely with a hammer.
You now have a beautiful shoe rack to show and tidy up your favorite shoes!
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...